2026/312 Landfill Environmental Monitoring - Mildura Rural City Council is seeking Tender responses from suitably qualified individuals and organisations to provide comprehensive environmental monitoring services at Mildura Landfill and, if required, the former Murrayville Landfill. ENQUIRIES: Any tender enquiries should be directed to the online forum in VendorPanel. INSPECTION: A site inspection is scheduled for 9. 00am on Friday 1 May 2026. Inspections are highly recommended but not mandatory. SUBMISSIO
Synthetic Greenhouse Gas/ Gaseous Fire Suppression/ Regulatory Trends/ Synthetic Greenhouse Gas Manag
Gaseous Fire Suppression Industry Report - Provision of a Gaseous Fire Suppression Industry Report to the Department of Climate Change, Energy, the Environment & am- The Department of Climate Change, Energy, the Environment and Water ( the Department) is seeking to commission a report on the gaseous fire suppression use of extinguishing agents scheduled under the Ozone Protection and Synthetic Greenhouse Gas Management Act ****, as it relates to Australia s regulation of ozone depleting substances ( ODS)
Gaseous fire suppression industry report
AI helper
The Department of Climate Change, Energy, the Environment and Water is seeking submissions for a comprehensive state-of-the-industry report on gaseous fire suppression and non-defence halon use in Australia. The report will provide up-to-date data on imports, installed banks, usage, decommissioning, regulatory trends, and future demand modelling for scheduled extinguishing agents, including HFCs to 2036 and Halon to 2050. The output will inform policy development, support the implementation of the HFC phasedown, and ensure ongoing management of halon stocks. Responses must be lodged electronically via Austender by Friday, 1st May 2026, 2:00 PM AEST. Questions regarding the tender can be submitted until Tuesday, 28 April 2026, 5:00 PM AEST. The contract term is 6 months with a potential 3-month extension option. Key deliverables include a comprehensive report and an interactive, user-friendly stock model. The department will provide relevant data and letters of introduction for stakeholder engagement. Potential suppliers must comply with the Commonwealth Approach to Market Terms and the Commonwealth Contract Terms.
The draft report and model are due by 15 October 2026, and the final report and model are due by 15 December 2026.
The customer must pay the amount of a correctly rendered invoice to the supplier within twenty (20) calendar days after receiving it, or if this day is not a business day, on the next business day.
The customer will evaluate all valid responses received by the ATM closing time that meet the minimum content and format requirements and the conditions for participation to determine which potential supplier has proposed the best value for money outcome for the customer.
Potential suppliers are required to comply with all requirements set out in the Commonwealth Approach to Market Terms and, if successful, agree to enter into a contract which incorporates the Commonwealth Contract Terms.
Questions will be permitted up until 5:00 PM AEST Tuesday, 28 April 2026.
Supply and Servicing of a Liquid Nitrogen Facility - Supply of Liquid Nitrogen in bulk quantities to National Measurement Institute s Lindfield Laboratory- Supply of Liquid Nitrogen at a rate of 210, 000 litres per year ( based on previous usage), including: Installation of a liquid nitrogen storage vessel with a liquid nitrogen capacity of 12, 500 litres or more. Further techinal requirements detailed in RFT documentation
to establish contract for supply and servicing of a liquid nitrogen facility installation of a liquid nitrogen storage vessel with a liquid nitrogen capacity of 12, 500litres or more. the installation must be a preferential gas withdrawal system. the installation must supply liquid nitrogen via an existing vacuum insulated supply line to a helium liquefier and a secondary liquid nitrogen storage tank. the installation must supply gaseous nitrogen to the building at ambient temperature at a pressure of 400 kpa. the complete installation must be fenced off and a key supplied to the nmi cryogenic facility manager for access to the facility in the case of an emergency. the necessary protection and safety devices must be installed so that the installation conforms to the relevant australian standards. regulators must be installed to ensure that the required supply pressures remain constant. the liquid nitrogen to be supplied must be **** pure lin 4. 0. this facility provides gaseous nitrogen as an inert atmosphe
AI helper
The tender is for the supply and servicing of a liquid nitrogen facility, including the installation of a storage vessel and ongoing maintenance. The contract will last for 4 years with an option for a 3-year extension. A site inspection is mandatory. The closing date for the tender is February 23, 2026. The supplier must comply with the Commonwealth Supplier Code of Conduct. The customer will pay the amount of a correctly rendered invoice to the supplier within five 5 calendar days after receiving it, or if this day is not a business day, on the next business day.
The bid notice states he storage vessel will be maintained as close to capacity, with **** pure lin 4. 0 liquid nitrogen as possible. , over the term of the contract.
The bid notice states he customer will pay the amount of a correctly rendered invoice to the supplier within five 5 calendar days after receiving it, or if this day is not a business day, on the next business day.
The customer will evaluate all valid responses received by the atm closing time item a. a. 1 that meet the minimum content and format requirements and the conditions for participation if any, to determine which potential supplier has proposed the best value for money outcome for the customer.
The tenderer and any subcontractors proposed in its tender must not be insolvent, bankrupt, in liquidation, or under administration or receivership as at the closing time.
The bid notice states a site inspection will be conducted: 10: 00am 4 february 4, 2026 wednesdaynational measurement institute nmi36 bradfield road, west lindfield nsw **** docnfirm attendance email: ***@***. *. *
Questions will be permitted up until 5: 00 pm thursday, 12 february 2026, act local time.
Northern Endeavour Decommissioning Phase 2 P& A Well Services - Northern Endeavour Phase 2 - Comprises wells permanent plug and abandonment services comprising the permanent plug and a- This procurement is for services to complete Phase 2 of the Northern Endeavour Decommissioning Program, which involves the permanent plugging and abandoning of all wells in the Laminaria and Corallina ( LamCor) Field including any associated field facilitysafety case services. Services will be delivered across two Stages
Official Northern Endeavour Decommissioning Program: Phase 2 Work scope and delivery location: a. the rft seeks a lead contractor to undertake the delivery of the work in the following two stages: i stage 1 provision of project management services, engineering services, achieving approval and regulatory acceptance for relevant contract deliverables, and ancillary services, to design and plan for the plugging and abandonment of 9 laminaria corallina lamcor oilfield wells wells situated within the lamcor oilfields stage 1 work, as further detailed in clauses 2. 2. 3a. and 4. 1 of the statement of work and ii stage 2 execution and completion of the plugging and abandonment of the wells, storage and transport of all recovered associated infrastructure and materials for disposal during phase 3 of the program and the provision of field monitoring services until the commonwealth appointed phase 3 contractor assumes responsibility of all subsea infrastructure and other associated materials stage 2 work, as further de
AI helper
The tender is for the decommissioning of the Northern Endeavour program, specifically Phase 2, which involves plugging and abandoning wells in the Lamcor oilfields. The work is divided into two stages: planning and design (Stage 1) and execution and completion (Stage 2). The closing date for clarification is November 17, 2025, and the closing time for the tender is December 1, 2025. The tender requires compliance with various Australian government policies, including Australian Industry Participation (AIP) and Indigenous Procurement Policy (IPP). Tenderers must also provide details of economic benefits to the Australian economy. A nondisclosure deed is required to access confidential information. The project is subject to a complex legislative and regulatory framework. The commonwealth may conduct industry briefings.
The timeframe for delivery is from June 2026 to June 2030.
The evaluation criteria for the rft are set out in table 2.
The commonwealth will exclude a tender from further consideration if any of the following conditions apply: a the tenderer, or any member of its consortium if applicable, has unresolved decisions against it relating to employee entitlements, where any resulting order remains unsatisfied excluding decisions under appealb the tenderer, its personnel, any consortium member if applicable, any proposed subcontractor, or subcontractor personnel are listed as terrorists under section 15 of the charter of the united nations act **** cth or named in the consolidated listc the tenderer is not a single legal entity with the capacity to contract, either independantly or as the lead of a consortiumd the tenderer does not hold all valid and satisfactory statements of tax record required for its entity type under item c2d of attachment c to the rft by the rft closing timee the tenderer does not hold if known at the time of tendering all valid and statements of tax record required for any proposed firsttier subcontractor, where the subcontractor is intended to deliver work under a contract with an estimated value of aud 4 million or more gst inclusivef the tender is a joint submission that is not from an established consortium and does not comply with clause 2. 3. 3b of the conditions of tender org the tender proposes delivery of only part of the work i. e. , a part tender.
The clarification closing time is 17 November 2025, **** AEDT.
Set your alerts once. Let opportunities come to you.
1
Tell us what you sell
Add keywords for your products or services. Smart matching helps find tenders that do not use the exact same words.
2
Start the free trial and receive alerts
Start the 14-day free trial and receive alerts with links to documents or official pages.
3
Fine-tune your feed
Adjust keywords, states/territories, delivery times and email style. Use filters and map view when needed.
What our users say
90% recommend BidHits Australia (1058 real users, 08/06/2026).Methodology
I closed deals thanks to the information gathered by the search tool. There’s no need to research across multiple media outlets.
J. Comunale
They deliver on their promises. The information is simple and straightforward.
G. G
They provide information on a wide and varied range of purchasing processes. All the necessary details are also included.
J. M. Defelitto
All tenders related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the tender documents.
R. M. Ferreira
Very good and accurate information about the tenders: consistent and precise.
G. R. Ortiz
The idea of ​​using a keyword and sending the information by email is very good.
We selected helpful reviews from real users. Order may change periodically.
It is complete and optimal, it improves my time.
R. de L. Cruz
The tool is truly effective at scanning tender documents, efficiently delivering bids.
G. D. Reis
Excellent information. Just what I was looking for.
L. H. Borrelli
A complete, easy-to-use system. Support from calm, patient, and clear-teaching professionals.
W. M. Da Silva
It encompasses all portals in one place.
G. Ferrea
Excellent platform to help promote and expand the reach of your work.
C. Merino
Sending job opportunities via email is very good. Their information sources are rich in opportunities. The ease of use and advanced search options also make the work easier. The great advantage is the well-organized compilation that facilitates the search for opportunities.
V. De Folga
Efficiency in search times.
R. Chavez
I liked it — very easy to navigate. It’s the best one I’ve found.
T. Brasil
The information helps me submit my bids on time for tenders, and I also have readily available information on upcoming tenders. So far, I am very satisfied with what I have received.
M. A. Z. Armenta
The platform is very user-friendly.
N. Lobato
I’m absolutely delighted with the system’s performance so far. This software has exceeded all my expectations, ensuring that no crucial keyword, such as “cathodic protection” and others related, goes unnoticed. Its precision and efficiency are remarkable, providing extra peace of mind in our operations. I’m truly impressed by its effectiveness.
BidHits Australia helps businesses find Australian public tenders. We monitor official portals daily, organise opportunities in one place, and deliver results on the site and by email.
Enter your email and activate the trial. For 14 days you can use all features. If you do not subscribe at /subscription.php when it ends, the tender list becomes limited and there are no automatic charges.
No. We monitor major official portals and bring matching opportunities into one workflow. You can receive alerts by email on the schedule you choose.
Whenever possible, yes. Some official portals require login or block direct links. In those cases, we point you to the official process page so you can access the documents there.
Yes. In the tenders panel you can filter by state/territory, procurement method, dates and value ranges. In settings, you can save preferences for future alerts and searches.
Yes. After signup you can switch to the map view and see tenders by location.
Smart matching helps find opportunities related to what you sell, even when a tender uses different wording. It can make mistakes, so you can improve results by adding, editing or removing keywords.
Yes. You can query tenders via API and receive data in JSON or XML. Documentation is available at /api_integration.php.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.
We monitor major official portals every day at Commonwealth, state/territory and local council levels. Tenders are added as soon as they are available from the source portal.
Plans start at A$ 65.00/month. All plans include the same features, and longer terms reduce the pro-rata cost. You can start with the free trial with no auto-charge.
Search a term, receive smart email alerts, open documents or official pages, and filter by region and procurement method.
Transcript
Welcome to BidHits Australia.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits Australia shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits Australia now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the tender...
Loading summary...
Methodology
Unaided survey with 1058 active users, conducted through 08/06/2026.
Single question: "Would you recommend our services to a friend or colleague?" - 90% answered "yes".
