Design and Implementation of SCADA and Telemetry Upgrades, Including IT/OT Network Separation - The project involves the design and implementation of upgrades to telemetry, SCADA, and associated OT infrastructure, including secure IT/OT network separation. A single Design and Construct delivery model has been selected to provide end- to- end accountability and minimise interface risk. Works must be delivered while maintaining continuity of live water and wastewater operations and minimising operational di
design and implementation of scada and telemetry upgrades, including itot network separation upgrade and modernisation of telemetry and scada infrastructure, including consolidation of existing standalone scada platforms into a unified, supported environment. implementation of secure itot network separation, including the supply and installation of network hardware, cybersecurity controls, and secure remote access. integration of remote sites using appropriate communications technologies, including cellular, fibre, radio backup, and satellite where required. testing, commissioning, training, documentation, and operational handover of all systems. phase 1 audit, discovery, and baseline assessment phase 1a scada software proof of concept poc phase 2 itot network separation cybersecurity uplift phase 2a communications technology selection phase 3 core infrastructure main plant scada telemetry upgrades phase 4 remote sites telemetry rollout phase 5 optimisation, training and final handovers
AI helper
The tender is for the design and implementation of SCADA and telemetry upgrades, including ITOT network separation. The project will be delivered in phases, with a focus on improving operational reliability, enhancing cybersecurity, and providing a scalable platform. The contractor must provide a turnkey solution, including design, supply, installation, configuration, testing, commissioning, and handover. The project involves upgrades to existing infrastructure, ITOT network separation, and integration of remote sites. The contractor must develop a SCADA and telemetry standards manual. The project will be delivered in clearly defined, costed phases. The contractor shall implement and maintain a formal change management process for the duration of the contract. All changes to scada, telemetry, ot networks, cybersecurity controls, configurations, firmware, software, or operational parameters shall be managed through a mandatory request for change rfc process.
The bid notice states council anticipates that delivery of this project may occur over multiple stages across several years, subject to operational priorities and budget availability.
The contractor must demonstrate: proven experience delivering scada, telemetry, and itot network separation projects within the water and sewer utilities sector.
Tasmanian Government Education International - International Student Management System ( DECYP ****) - Supply and implementation of an International Student Management System to manage recruitment, admissions, enrolment, welfare, compliance, and integrations for Tasmanian Government Education International
Supply and implementation of an international student management system to manage recruitment, admissions, enrolment, welfare, compliance, and integrations for its anticipated tasmanian government education international.
AI helper
The tender is for the supply and implementation of an International Student Management System. The closing time for lodging a tender is 2pm Hobart time on 11 February 2026. Enquiries regarding this RFT should be directed to Angela Berechree. The customer reserves the right to negotiate with tenderers during the procurement process. Tenders must be lodged using the Tasmanian Government's tender website. The successful tenderer will be required to enter into a contract. The customer may extend the closing time. Unsuccessful tenderers are encouraged to request a debriefing. The economic and social benefits statement will contribute 30% towards the evaluation of the tender.
The closing time for the lodgement of tenders is shown in part b, which is 2pm Hobart time on 11 February 2026. A tender must be lodged, in accordance with this rft, on or before 2pm hobart time on 11 february 2026 the closing time.
The evaluation criteria include demonstrated capability and experience, implementation approach and capacity, risk, security compliance, economic and social benefits statement, and price. The evaluation criteria applicable to the evaluation of tenders that have not been excluded from evaluation pursuant to another provision of this rft, and the relative weightings of those criteria, are as follows. . .
Tenders will be assessed against conditions for participation in part a of attachment 5. If a tender, or the tenderer who lodged that tender, does not satisfy any condition for participation in part a of attachment 5, at time of opening tenders, the tender will be rejected, and excluded from evaluation.
A potential supplier must not inspect a site or sites relevant to the delivery of the deliverables except in accordance with a site inspection site inspection arranged by the potential supplier with the contact officer.
Design and Implementation of SCADA and Telemetry Upgrades, Including IT/OT Network Separation - The project involves the design and implementation of upgrades to telemetry, SCADA, and associated OT infrastructure, including secure IT/OT network separation. A single Design and Construct delivery model has been selected to provide end- to- end accountability and minimise interface risk. Works must be delivered while maintaining continuity of live water and wastewater operations and minimising operational di
design and implementation of scada and telemetry upgrades, including itot network separation upgrade and modernisation of telemetry and scada infrastructure, including consolidation of existing standalone scada platforms into a unified, supported environment. implementation of secure itot network separation, including the supply and installation of network hardware, cybersecurity controls, and secure remote access. integration of remote sites using appropriate communications technologies, including cellular, fibre, radio backup, and satellite where required. testing, commissioning, training, documentation, and operational handover of all systems. phase 1 audit, discovery, and baseline assessment phase 1a scada software proof of concept poc phase 2 itot network separation cybersecurity uplift phase 2a communications technology selection phase 3 core infrastructure main plant scada telemetry upgrades phase 4 remote sites telemetry rollout phase 5 optimisation, training and final handover
AI helper
The Muswellbrook Shire Council is seeking tenders for the design, supply, installation, configuration, testing, commissioning, and handover of a modernised telemetry and SCADA system, along with the implementation of secure ITOT network separation across the council's water and wastewater assets. The project will be delivered in clearly defined, costed phases. The contractor must provide a turnkey solution, taking full responsibility for the end-to-end delivery. The project may occur over multiple stages across several years, subject to operational priorities and budget availability. The contractor shall provide system lifecycle planning covering a **** year horizon. The contractor shall implement and maintain a formal change management process for the duration of the contract. The contractor shall ensure full auditability and traceability of all works delivered under this contract.
The notice states that the project will be delivered in phased stages, potentially over multiple financial years.
The contractor must demonstrate proven experience delivering SCADA, telemetry, and ITOT network separation projects within the water and sewer utilities sector.
Learning Services Panel - Learning Services Panel- The Department of Agriculture, Fisheries and Forestry ( DAFF) is establishing the DAFF Academy to unify all corporate, leadership and technical learning into a single, evidence- based capability system aligned with the DAFF Capability Framework, APS Craft Framework and APS Workforce Strategy 2025. This integrated model ensures consistent standards, strengthened governance and scalable learning pathways that meet legislative training requirements and build a
Learning Services Panel Category A: Core APS foundational capability suppliers may deliver learning aligned to the following topics: working in government, APS values, ethics, integrity, safety, stakeholder engagement, collaboration, teamwork, adaptability, resilience, communication, influence, systems thinking. Category B: Leadership, people management, strategic capability suppliers may deliver learning aligned to topics that support leadership and management capability across APS 5- SES levels: leading, managing people, building culture, capability, inspiring collective purpose, program, project design, innovation, creative problem solving, horizon scanning, trend analysis. Category C: Policy, regulatory governance capability suppliers may deliver learning aligned to the policy, regulatory, governance and compliance capabilities required across daff: strategic policy design, development, evaluation, impact measurement, evidence- based advice, stakeholder integration, regulatory framework knowledge applicat
AI helper
The Department of Agriculture, Fisheries and Forestry (DAFF) is seeking to establish a panel of learning services providers to design, deliver, and evaluate learning programs aligned with APS frameworks. The closing date for submissions is January 28, 2026. The contract is expected to commence by July 1, 2026, with an initial term of 3 years and two possible extensions of up to 1 year. Potential suppliers must provide a valid and satisfactory Statement of Tax Record (STR) and comply with the Commonwealth Supplier Code of Conduct. An industry briefing will be held on January 12, 2026. The evaluation will be based on best value for money, considering weighted and non-weighted criteria. The contract delivery must achieve economic benefit for the Australian economy. The potential supplier must provide details of any key health and safety risks arising from the provisioning of the goods andor services and the potential suppliers proposed methods to mitigate them.
The contract is expected to commence by July 1, 2026, to ensure seamless continuity of the Btc delivery and daffs corporate learning calendar. services must commence by 1 july 2026 to ensure seamless continuity of the btc delivery and daffs corporate learning calendar.
Tenders will be evaluated on the basis of best value for money consistent with the commonwealth procurement rules, in accordance with the evaluation criteria set out at clause 6. 6 and the terms of this atm. enders will be evaluated on the basis of best value for money consistent with the commonwealth procurement rules, in accordance with the evaluation criteria set out at clause 6. 6 and the terms of this atm.
The customer will exclude a tender from further consideration if, at the closing time, the customer considers that the potential supplier does not meet any one or more of the following conditions for participation: i the potential supplier holds and provides all valid and satisfactory statements of tax record required for its entity type under part 10 of the shadow economy procurement connected policy. he customer will exclude a tender from further consideration if, at the closing time, the customer considers that the potential supplier does not meet any one or more of the following conditions for participation: i the potential supplier holds and provides all valid and satisfactory statements of tax record required for its entity type under part 10 of the shadow economy procurement connected policy.
Attendance at the industry briefing is optional. c attendance at the industry briefing is optional.
The deadline for submission of potential suppliers questions is 4:00pm local time in the australian capital territory on tuesday, 20 january **** for submission of 4: 00pm local time in the australian capital potential suppliers questions territory on tuesday, 20 january 2026
Operational Technology Panel - South East Water ( SEW) is one of Melbourne s three state- owned metropolitan water retailers. We provide water, sewerage, trade waste and recycled water services for residents and businesses in Melbourne s south east, located in the state of Victoria, Australia. We service more than 1. 75 million people including more than 748, 000 residential water customers and more than 55, 000 non- residential water customers. In a region spanning 3, 640 square kilometres, each year we de
Operational Technology Panel telemetry, physical security: design, supply, installation and maintenance of security systems cctv, access control, intruder detection, automated gates, integration with remote terminal units rtus, and specialised fabrication. expertise in working at heights, confined spaces, minor civil works, locksmithing, and electrical installations is essential. devops systems platforms: fullstack web and mobile app development, cloud solutions microsoft azure, and integration of emerging technologies such as ai, ml and robotic process automation rpa. capabilities in data analytics, visualisation power bi, and iot integration are required. iot: contract manufacturing and prototyping of iot devices, including pcb assembly and compliance with iso standards. installation, maintenance and testing of iot devices across water and sewer assets, plus development and integration of test jigs for validation. product development: mechanical and industrial design solidworks, firmware and software develo
AI helper
The tender is for an Operational Technology Panel. The key capability areas include telemetry, physical security, devops systems platforms, IoT, product development, and SCADA. The closing date for the tender is February 2, 2026. The online forum provides a place to comment and obtain further clarification if needed. Comments cannot be posted after 28 January 2026 05:00 pm.
The bid notice states that comments cannot be posted after 28 January 2026 05:00 pm.
Add words related to your products or services. Our AI broadens the search so you don't miss opportunities.
2
Start your free trial and receive email alerts
Start the 14-day free trial and receive alerts with links to the documents and to the official page.
3
Adjust if needed
Add or edit keywords, set states/territories, choose your delivery schedule and email style. A map view is available in the dashboard.
What our users say
90% recommend BidHits Australia (1003 real users, 03/03/2026).Methodology
I closed deals thanks to the information gathered by the search tool. There’s no need to research across multiple media outlets.
J. Comunale
They deliver on their promises. The information is simple and straightforward.
G. G
They provide information on a wide and varied range of purchasing processes. All the necessary details are also included.
J. M. Defelitto
All tenders related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the tender documents.
R. M. Ferreira
Very good and accurate information about the tenders: consistent and precise.
We selected the most helpful reviews from real users. Order may change periodically.
The tool is truly effective at scanning tender documents, efficiently delivering bids.
G. D. Reis
Efficiency in search times.
R. Chavez
The search engine that finds what I'm looking for just by entering keywords
J. P. L. Construccion
Easy to find the bids.
R. M. David
Excellent platform to help promote and expand the reach of your work.
C. Merino
With the chosen keywords, I can find many tenders of interest! I learn about new notices well in advance, giving me enough time to get organized to participate.
D. Comaq
I get exactly what I asked for—quickly, daily, and simply. The search arrives pre-filtered, so there’s no time wasted digging through countless websites, and it’s always up to date!
P. C. O. Da Silva
It helps me identify areas of opportunity and find tenders related to my work area.
I. J. R. Beltran
It is complete and optimal, it improves my time.
R. de L. Cruz
The search tool really works and satisfactorily meets our needs.
D. L. Cairuga
Well-focused searches and highly professional service. It’s been very useful, and hiring you was the right decision. With agility and confidence in our market segment, it’s driving our revenue growth.
BidHits Australia is a public tenders search engine. We map official portals daily and deliver results on the site and by email. Our AI understands your business so you don't miss opportunities.
Just enter your email and activate the trial. For 14 days you can use all features. When it ends, if you don't subscribe at /subscription.php, the tenders list becomes limited and there are no automatic charges.
1) Choose keywords (your products or services). 2) Activate the trial and start receiving. After signup you can adjust regions, times, and email style on the settings page.
Whenever possible, yes. Some official portals require login or block direct links; in those cases we point you to the official process page so you can download the documents.
Yes. In the tenders panel you can filter by region, procurement method, dates, and value ranges. In settings you can save preferences for future alerts and searches.
Yes. After signup you can switch to the map in the panel and see tenders by location.
AI can make mistakes. It's trained to understand your business based on the keywords you add. Refine by adding specific terms, modifying or deleting those that produce off-topic results. That trains your feed and improves future alerts.
Yes. You can query tenders via API. Documentation at /api_integration.php. Ideal for CRM, BI and automations.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there's no auto-charge.
We monitor major official portals every day at the Commonwealth, state/territory and local council levels. Tenders are added to the system as soon as they are published on the source portal.
Plans start at A$ 65.00/month. Start with the free trial--no auto-charge.
Explore a term, enable AI email alerts, access the tender documents or official portal, and filter by region and procurement method.
Transcript
Welcome to BidHits Australia. Start by adding a few keywords. Just type what you sell.
That's it. You're now ready to explore government contract opportunities made for you. Your bidding dashboard shows the latest tenders organized by date and matched to your keywords.
To help you spot the most relevant ones, your keywords are automatically highlighted in yellow.
And here's the best part. Our AI is always working behind the scenes to bring you even more opportunities.
Smart Search is already on, enhancing your results beyond exact matches. You don't have to do a thing.
Each tender card comes with useful tools. You can view a summary, open documents, favorite tenders, write private notes, remove what doesn't fit, or check the location on the map.
You can also see all tenders from the same day in a single map view. Perfect for planning your next steps. Use the search bar, apply filters, and explore with ease.
Try BidHits Australia now. It's fast, smart, and free to get started.
AI Assistant
Ask me about the tender...
Loading summary...
Methodology
Unaided survey with 1003 active users, conducted through 03/03/2026.
Single question: "Would you recommend our services to a friend or colleague?" - 90% answered "yes".
