Supply and Install of 14 kVA Standby Generator at DUA SES - The Contractor shall supply, install, connect, test and commission a new 14 kVA standby generator, complete with a suitably rated Automatic Transfer Switch ( ATS) and all associated electrical and ancillary works required to provide a complete, compliant and fully operational automatic standby power system. The works shall be submitted as per a fixed lump sum The Contract shall be undertaken on a Fixed Lump Sum basis, with the Contractor agreeing t
Supply and install of a 14 kVA standby generator with automatic transfer switch at Duaringa SES shed 14 kVA standby generator, automatic transfer switch ( ATS), associated electrical and ancillary works, installation, connection, testing and commissioning
AI helper
Supply and install a 14 kVA standby generator with ATS at Duaringa SES shed, 19 Mary Street, Duaringa QLD **** lump sum contract covering all labour, materials, plant, equipment, supervision, overheads and profit. Projected completion by end of December 2026. Tender closes 11 November 2026. Supplier queries cutoff 9 November 2026. Expected decision 18 November 2026. Refer to attachment B for specifications.
Projected to be completed by end of December 2026. The contract specifies a completion date in schedule 1, with liquidated damages if not met. projected to be completed by end of december 2026
Payment is made after completion of the supply and submission of a valid tax invoice. Council pays the amount in the payment schedule within the timeframe stated in schedule 1. council will pay the amount in the payment schedule within the time frame stated in schedule 1
The contractor warrants goods will be new, of merchantable quality, free from defects, and comply with the National Construction Code. Manufacturer warranties must be provided. the contractor warrants that any goods supplied will: be new. . . be free from defects
The contractor must have the necessary experience, an appropriately qualified and trained workforce, and all required accreditations and licences. it has and will maintain the necessary experience, and an appropriately qualified and trained workforce
Liquidated damages apply at the rate stated in schedule 1 for each day completion is delayed. the contractor will be liable to council for liquidated damages at the rate stated in schedule 1
Failure to achieve completion by the completion date results in liability for liquidated damages. if the contractor fails to achieve completion by the completion date. . . the contractor will be liable to council for liquidated damages
Supply and Install of 14 kVA Standby Generator at DUA SES - The Contractor shall supply, install, connect, test and commission a new 14 kVA standby generator, complete with a suitably rated Automatic Transfer Switch ( ATS) and all associated electrical and ancillary works required to provide a complete, compliant and fully operational automatic standby power system. The works shall be submitted as per a fixed lump sum The Contract shall be undertaken on a Fixed Lump Sum basis, with the Contractor agreeing t
Supply and install of 14 kVA standby generator at DUA SES 14 kVA standby generator, automatic transfer switch ( ATS), associated electrical and ancillary works, installation, connection, testing and commissioning
AI helper
Supply, install, connect, test and commission a 14 kVA standby generator with ATS at Duaringa SES shed, 19 Mary Street, Duaringa QLD **** lump sum contract covering all labour, materials, plant, equipment, supervision, overheads and profit. Projected completion by end of December 2026. Tender closes 4 November 2026. Supplier queries cutoff 2 November 2026. Expected decision 11 November 2026.
Projected to be completed by end of December 2026. The contract specifies a completion date in schedule 1, with liquidated damages for late completion. projected to be completed by end of december 2026
Payment is made via payment claims and schedules. Council pays the amount in the payment schedule within the timeframe stated in schedule 1 after receipt of a compliant payment claim. council will pay the amount in the payment schedule within the time frame stated in schedule 1
The contractor warrants goods will be new, of merchantable quality, free from defects, and comply with the National Construction Code. Manufacturer warranties must be provided to council. the contractor warrants that any goods supplied will: be new. . . be free from defects
The contractor must have necessary experience, an appropriately qualified and trained workforce, and all required accreditations and licences. it has and will maintain the necessary experience, and an appropriately qualified and trained workforce
Liquidated damages apply at the rate stated in schedule 1 for each day completion is delayed. the contractor will be liable to council for liquidated damages at the rate stated in schedule 1
Failure to achieve completion by the completion date results in liability for liquidated damages. The contractor must notify council of delays within three business days. if the contractor fails to achieve completion by the completion date. . . liable to council for liquidated damages
Standby Generator/ Commissioning Services/ Standby Power Specialists
Supply and Install of 14 kVA Standby Generator at DUA SES - The Contractor shall supply, install, connect, test and commission a new 14 kVA standby generator, complete with a suitably rated Automatic Transfer Switch ( ATS) and all associated electrical and ancillary works required to provide a complete, compliant and fully operational automatic standby power system. The works shall be submitted as per a fixed lump sum The Contract shall be undertaken on a Fixed Lump Sum basis, with the Contractor agreeing t
Supply and install of 14 kVA standby generator with automatic transfer switch at Duaringa SES shed 14 kVA standby generator, automatic transfer switch ( ATS), associated electrical and ancillary works, installation, connection, testing and commissioning
AI helper
Supply, install, connect, test and commission a 14 kVA standby generator with ATS at Duaringa SES shed, 19 Mary Street, Duaringa QLD **** lump sum contract covering all labour, materials, plant, equipment, supervision, overheads and profit. Projected completion by end of December 2026. Tender closes 4 November 2026. Supplier queries cutoff 2 November 2026. Expected decision 11 November 2026.
Projected to be completed by end of December 2026. The contract specifies a completion date in schedule 1, with liquidated damages for late completion. projected to be completed by end of december 2026
Payment is made against payment claims submitted by the contractor, with council issuing a payment schedule and paying within the timeframe stated in schedule 1. council will pay the amount in the payment schedule within the time frame stated in schedule 1
The contractor warrants goods will be new, of merchantable quality, free from defects, and comply with the National Construction Code. be free from defects and to the extent it applies to the goods, comply with the national construction code
The contractor must have necessary experience, appropriately qualified and trained workforce, and maintain required accreditations. it has and will maintain the necessary experience, and an appropriately qualified and trained workforce
Liquidated damages apply at the rate stated in schedule 1 for each day after the completion date until completion is achieved. the contractor will be liable to council for liquidated damages at the rate stated in schedule 1
Failure to achieve completion by the completion date results in liability for liquidated damages. if the contractor fails to achieve completion by the completion date. . . the contractor will be liable to council for liquidated damages
Freight Services/ Trucking Services/ Transport Services/ Emergency Services Support
Provision of Bulk Water, Prime Mover and Hook Lift Service - Request for Tender ( RFT) Bulk Water, Prime Mover and Hook Lift Services Tender Reference: CFA- 2026- **** The Country Fire Authority ( CFA) invites suitably qualified and experienced suppliers to submit tenders for the provision of Bulk Water Transport, Prime Mover and Hook Lift Services across Victoria. CFA is seeking to establish a statewide panel arrangement to support emergency response operations, planned activities, training exercises, flee
Provision of bulk water transport, prime mover and hook lift services Category 1: Hook lift services - hook lift vehicles and qualified operators, transport, delivery and retrieval of containers, bins and operational equipment, asset relocations, emergency deployment and recovery, standby and surge response. Category 2: Prime mover services - prime movers and drivers, transport of trailers, plant, heavy equipment and operational assets, emergency and planned logistics support, standby and afterhours response, chain of responsibility compliance. Category 3: Bulk water transport services - bulk water tankers, potable and non- potable water transport, water supply to incidents and staging areas, emergency surge capability.
AI helper
CFA Victoria seeks tenders for bulk water transport, prime mover and hook lift services statewide. Panel arrangement for emergency response, planned activities, training and fleet movements. Three categories: hook lift, prime mover, bulk water transport. Initial term 1 year with four 1-year extension options. Tender closes 9 November 2026 at 2pm Melbourne time. Questions via Tenders Vic online forum until 6 November 2026. Draft contract Part C to be issued week commencing 26 October 2026.
Engineering Infrastructure Replacement - The Prince Charles Hospital - Principal Contractor - TPCH essential engineering infrastructure supporting the campus - standby generation, main low voltage ( LV) distribution and central chilled water plant - has reached the end of its serviceable life and requires replacement to maintain the resilience, capacity and compliance of the facility. The infrastructure to be replaced serves the whole of the operational hospital campus. It must remain in service, or be supp
Engineering infrastructure replacement at The Prince Charles Hospital - Principal Contractor Replacement of standby generation, main low voltage ( LV) distribution and central chilled water plant; removal of 4 existing LV standby generators; installation of 3 new diesel generators with exhaust treatment in acoustic enclosures; new electrical plantroom; new generator LV switchboard; new LV submains cabling; conversion of existing main switchboards to main distribution boards; replacement of 1 mechanical services switchboard; new LV main switchboard in building 15; second external plantroom with single standby diesel generator; street lighting, external CCTV and duress; removal of 3 water cooled chillers and installation of 4 new chillers; removal of 3 air cooled chillers; removal of 4 cooling towers and installation of new cooling towers; modification of plantroom ventilation; new mechanical services switchboards and BMS extension; new chilled water pipework; new air handling units; construction of external sl
AI helper
EOI for Principal Contractor role to replace essential engineering infrastructure at The Prince Charles Hospital, a live operational hospital. Scope includes standby generation, LV distribution and central chilled water plant replacement. Works must be delivered in a 24/7 clinical environment with no unplanned loss of essential power or cooling. EOI closes 5 October 2026. Evaluation based on technical capacity, relevant experience, financial stability and local participation. Design and construct contract anticipated from January/February 2027, with works over approximately 2-3 years. Mandatory criteria include insurances, licences, PQC registration and ISO **** quality management.
Set your alerts once. Let opportunities come to you.
1
Tell us what you sell
Add keywords for your products or services. Smart matching helps find tenders that do not use the exact same words.
2
Start the free trial and receive alerts
Start the 14-day free trial and receive alerts with links to documents or official pages.
3
Fine-tune your feed
Adjust keywords, states/territories, delivery times and email style. Use filters and map view when needed.
What our users say
All tenders related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the tender documents.
R. M. Ferreira
They deliver on their promises. The information is simple and straightforward.
G. G
They provide information on a wide and varied range of purchasing processes. All the necessary details are also included.
J. M. Defelitto
I receive the tenders in a timely and proper manner.
R. Rama
Good information. All the information is very good!
We selected helpful reviews from real users. Order may change periodically.
It encompasses all portals in one place.
G. Ferrea
I consistently received notifications about tenders within the specific segment I chose to monitor. The system simplifies processes that used to be complex, offering a navigation experience that is easy, fast, and modern.
G. P. da S. E. Guimaraes
Excellent. More searches and many advantages.
R. Lopez
Everything is perfect. They are a great help in finding tenders relevant to our field of work. I really appreciate that the tenders are sent directly to my email; it’s a huge help in identifying where I can contribute and what I can do.
Oto
I closed deals thanks to the information gathered by the search tool. There’s no need to research across multiple media outlets.
J. Comunale
Very good and accurate information about the tenders: consistent and precise.
G. R. Ortiz
I like the way they provide information with the greatest possible accuracy. I love that.
M. A. Neil
The tool is truly effective at scanning tender documents, efficiently delivering bids.
G. D. Reis
Excellent information. Just what I was looking for.
L. H. Borrelli
The tenders appear appropriately based on my interests.
V. Niembro
It is complete and optimal, it improves my time.
R. de L. Cruz
You see a lot of tenders; you get emails with the alerts.
M. Camarasa
Smart search helped discover tenders I hadn't even imagined receiving notifications for.
BidHits helps businesses find Australian public tenders. We monitor official portals daily, organise opportunities in one place, and deliver results on the site and by email.
Enter your email and activate the trial. For 14 days you can use all features. If you do not subscribe at /subscription.php when it ends, the tender list becomes limited and there are no automatic charges.
No. We monitor major official portals and bring matching opportunities into one workflow. You can receive alerts by email on the schedule you choose.
Whenever possible, yes. Some official portals require login or block direct links. In those cases, we point you to the official process page so you can access the documents there.
Yes. In the tenders panel you can filter by state/territory, procurement method, dates and value ranges. In settings, you can save preferences for future alerts and searches.
Yes. After signup you can switch to the map view and see tenders by location.
Smart matching helps find opportunities related to what you sell, even when a tender uses different wording. It can make mistakes, so you can improve results by adding, editing or removing keywords.
Yes. You can query tenders via API and receive data in JSON or XML. Documentation is available at /api_integration.php.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.
We monitor major official portals every day at Commonwealth, state/territory and local council levels. Tenders are added as soon as they are available from the source portal.
Plans start at A$ 30.00 per month, with options for different business needs and billing terms. Start with a free trial and evaluate the results before subscribing, with no automatic billing.
Search a term, receive smart email alerts, open documents or official pages, and filter by region and procurement method.
Transcript
Welcome to BidHits.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the tender...
Loading summary...
Methodology
Unaided survey with 1115 active users, conducted through 06/11/2026.
Single question: "Would you recommend our services to a friend or colleague?" - 90% answered "yes".
