Training Welding Bays and Fume Extraction Systems - TAFE Queensland is seeking information from suitably qualified suppliers regarding the provision of welding training bays, welding fume extraction systems, associated infrastructure, and supporting equipment for educational and training facilities across TAFE Queensland campuses. The information obtained through this RFI will assist TAFE Queensland in understanding available market capabilities, developing functional requirements, estimating budgetary cons
Supply and installation of training welding bays and fume extraction systems Welding training bays, welding fume extraction systems, associated infrastructure, supporting equipment, extraction arms, downdraft solutions, enclosed or semi- enclosed booths, automated extraction technologies, air quality monitoring platforms, filter systems, welding positioners
AI helper
TAFE Queensland seeks information from suppliers for welding training bays and fume extraction systems across 26 campuses. RFI for market research only, no obligation to tender. Suppliers must address fume capture performance, emerging technologies, monitoring controls, training environment suitability, scalability, compliance with Australian standards, service support, and indicative pricing. Responses due by 12pm AEST Friday 6 November 2026 via email to ***@***. *. * trials and pilot evaluations anticipated for shortlisted suppliers.
**** HVAC Installation & Maintenance - Council is seeking to establish a panel of suitably qualified and experienced contractors to provide Heating, Ventilation and Air Conditioning ( HVAC) installation, maintenance, repair and associated mechanical services across Council' s asset portfolio. The panel will be utilised on a scheduled and as- required basis to support both operational and capital works programs, including planned preventative maintenance, reactive repairs, minor and major installations, re
Establishment of a panel of contractors for HVAC installation, maintenance, repair and associated mechanical services across council' s asset portfolio. Preventative maintenance of mechanical systems, reactive repairs, minor and major installations, replacements, upgrades, refurbishments, system renewals, inspection, testing, fault finding, commissioning, certification, building management system ( BMS) integration, energy efficiency improvements, ductwork modifications, controls and automation works, emergency callout services, cooling tower maintenance, chiller maintenance, boiler and heating system maintenance, air balancing.
AI helper
Council seeks to establish a panel of qualified HVAC contractors for installation, maintenance, repair and associated mechanical services across its asset portfolio. Services include planned preventative maintenance, reactive repairs, installations, upgrades, BMS integration, and emergency callouts. Tender closes 9 November 2026 at 2:00pm via VendorPanel portal. Enquiries via portal until 5 November. Contract term 2 years with 3 optional 1-year extensions. Evaluation includes experience, capability, WHS, cyber security, and local economic development criteria.
Payment will be made based on actual hours worked on site and approved materials utilised. payment will be made based on the actual hours worked on site and approved materials utilised.
Contractors must hold relevant licences, registrations and accreditations. all contractors and subcontractors engaged under this panel agreement must: hold all relevant licences, registrations and accreditations
Council will not accept late submissions. council will not accept late submissions.
Local Exhaust Ventilation/ Air Filtration Systems/ Workshop Ventilation/ Industrial Exhaust Systems/ Ventilation System Suppliers
Training Welding Bays and Fume Extraction Systems - TAFE Queensland is seeking information from suitably qualified suppliers regarding the provision of welding training bays, welding fume extraction systems, associated infrastructure, and supporting equipment for educational and training facilities across TAFE Queensland campuses. The information obtained through this RFI will assist TAFE Queensland in understanding available market capabilities, developing functional requirements, estimating budgetary cons
Supply and installation of training welding bays and fume extraction systems Welding training bays, welding fume extraction systems, associated infrastructure, supporting equipment, extraction arms, downdraft solutions, enclosed or semi- enclosed booths, automated extraction technologies, air quality monitoring platforms, filter systems, welding positioners
AI helper
TAFE Queensland seeks information from suppliers on welding training bays and fume extraction systems for 26 campuses. RFI only, no obligation to tender. Responses due 12pm AEST 6 November 2026 via email. Suppliers should provide technical specs, compliance documentation, pricing, and availability for trials. Key focus: fume capture effectiveness, suitability for educational environments, scalability, and whole-of-life costs.
**** HVAC Installation & Maintenance - Council is seeking to establish a panel of suitably qualified and experienced contractors to provide Heating, Ventilation and Air Conditioning ( HVAC) installation, maintenance, repair and associated mechanical services across Council' s asset portfolio. The panel will be utilised on a scheduled and as- required basis to support both operational and capital works programs, including planned preventative maintenance, reactive repairs, minor and major installations, re
HVAC installation, maintenance, repair and associated mechanical services panel Preventative maintenance of mechanical systems, reactive repairs, minor and major installations, replacements, upgrades, refurbishments, system renewals, inspection, testing, fault finding, commissioning, certification, BMS integration, energy efficiency improvements, ductwork modifications, controls and automation works, emergency callout services, cooling tower maintenance, chiller maintenance, boiler and heating system maintenance, air balancing
AI helper
Council seeks to establish a panel of qualified HVAC contractors for installation, maintenance, repair and associated mechanical services across its asset portfolio. Services include planned preventative maintenance, reactive repairs, installations, upgrades, BMS integration, emergency callouts. Contract term: 2 years plus 3 optional 1-year extensions. Tenders must be lodged via VendorPanel portal by 9 November 2026, 2:00pm. Enquiries via portal by 5 November 2026. Evaluation includes experience, capability, WHS, cyber security, quality management, local economic development. Insurance requirements: product liability $20M, public liability $20M, professional indemnity $10M.
Payment will be made based on actual hours worked on site and approved materials utilised. payment will be made based on the actual hours worked on site and approved materials utilised.
Contractors must hold relevant licences, registrations and accreditations. all contractors and subcontractors engaged under this panel agreement must: hold all relevant licences, registrations and accreditations
Council will not accept late submissions. council will not accept late submissions.
SWTAFE F Building Mechanical Upgrade Project ( reduced scope) - SWTAFE F Building Mechanical Upgrade Project ( reduced scope) SWTAFE is seeking tender submissions from suitably qualified and experienced mechanical contractors for replacement of HVAC infrastructure within F Building at SWTAFE' s Warrnambool City Campus. Scope: The successful contractor shall be appointed as the Head Contractor and will be responsible for the coordination and provision of all construction implementation. This is inclusive of
Replacement of HVAC infrastructure within F building at SWTAFE Warrnambool City Campus Mechanical upgrade project including demolition strip out, supply and installation of mechanical systems, ductwork, pipework, louvres, weather hoods, balancing provisions, electrical works, testing, commissioning, documentation, QA, as- built drawings and handover
AI helper
SWTAFE seeks tenders from qualified mechanical contractors for HVAC infrastructure replacement in F building at Warrnambool City Campus. Contractor appointed as head contractor responsible for design, engineering, approvals, site investigations, and implementation. Scope includes demolition, mechanical systems supply/installation, electrical works, testing, commissioning, and handover. Tender queries via Buying for Victoria portal by 13 Nov 2026. RFT closes 20 Nov 2026.
Set your alerts once. Let opportunities come to you.
1
Tell us what you sell
Add keywords for your products or services. Smart matching helps find tenders that do not use the exact same words.
2
Start the free trial and receive alerts
Start the 14-day free trial and receive alerts with links to documents or official pages.
3
Fine-tune your feed
Adjust keywords, states/territories, delivery times and email style. Use filters and map view when needed.
What our users say
All tenders related to our product are captured by you and sent to us. In my opinion, it’s perfect—broad coverage and easy searches across the tender documents.
R. M. Ferreira
They deliver on their promises. The information is simple and straightforward.
G. G
They provide information on a wide and varied range of purchasing processes. All the necessary details are also included.
J. M. Defelitto
I receive the tenders in a timely and proper manner.
R. Rama
Good information. All the information is very good!
We selected helpful reviews from real users. Order may change periodically.
It encompasses all portals in one place.
G. Ferrea
I consistently received notifications about tenders within the specific segment I chose to monitor. The system simplifies processes that used to be complex, offering a navigation experience that is easy, fast, and modern.
G. P. da S. E. Guimaraes
Excellent. More searches and many advantages.
R. Lopez
Everything is perfect. They are a great help in finding tenders relevant to our field of work. I really appreciate that the tenders are sent directly to my email; it’s a huge help in identifying where I can contribute and what I can do.
Oto
I closed deals thanks to the information gathered by the search tool. There’s no need to research across multiple media outlets.
J. Comunale
Very good and accurate information about the tenders: consistent and precise.
G. R. Ortiz
I like the way they provide information with the greatest possible accuracy. I love that.
M. A. Neil
The tool is truly effective at scanning tender documents, efficiently delivering bids.
G. D. Reis
Excellent information. Just what I was looking for.
L. H. Borrelli
The tenders appear appropriately based on my interests.
V. Niembro
It is complete and optimal, it improves my time.
R. de L. Cruz
You see a lot of tenders; you get emails with the alerts.
M. Camarasa
Smart search helped discover tenders I hadn't even imagined receiving notifications for.
BidHits helps businesses find Australian public tenders. We monitor official portals daily, organise opportunities in one place, and deliver results on the site and by email.
Enter your email and activate the trial. For 14 days you can use all features. If you do not subscribe when it ends, the tender list becomes limited and there are no automatic charges.
No. We monitor major official portals and bring matching opportunities into one workflow. You can receive alerts by email on the schedule you choose.
Whenever possible, yes. Some official portals require login or block direct links. In those cases, we point you to the official process page so you can access the documents there.
Yes. In the tenders panel you can filter by state/territory, procurement method, dates and value ranges. In settings, you can save preferences for future alerts and searches.
Yes. After signup you can switch to the map view and see tenders by location.
Smart matching helps find opportunities related to what you sell, even when a tender uses different wording. It can make mistakes, so you can improve results by adding, editing or removing keywords.
Yes. You can query tenders via API and receive data in JSON or XML. Documentation is available at /api_integration.php.
In Settings you can pause alerts or adjust delivery times. If you want to delete your account, just contact us. During the free trial there is no auto-charge.
We monitor major official portals every day at Commonwealth, state/territory and local council levels. Tenders are added as soon as they are available from the source portal.
Search a term, receive smart email alerts, open documents or official pages, and filter by region and procurement method.
Transcript
Welcome to BidHits.
Finding public tenders and bids is important. But what really matters is quickly identifying the opportunities that match what your company sells.
To get started, enter a few keywords that describe your products or services. BidHits shows relevant opportunities, highlights your keywords, and organizes everything by date.
Smart search is already enabled and uses artificial intelligence to expand your results, even when the tender uses different words from the ones you searched for.
For each opportunity, you can view a summary, access documents, mark it as a favorite, add private notes, remove what is not relevant, or view it on the map.
You can also use filters, run searches, and explore the day's opportunities directly on the map.
Start using BidHits now. It's fast, practical, and you can try it for free.
AI Assistant
Ask me about the tender...
Loading summary...
Methodology
Unaided survey with 1115 active users, conducted through 06/11/2026.
Single question: "Would you recommend our services to a friend or colleague?" - 90% answered "yes".
